Part Image

ADMV8818SCCZ-EP - Analog Devices

Description: 2 GHz to 18 GHz, Digitally Tunable, High-Pass and Low-Pass Filter

Download ADMV8818SCCZ-EP Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
ADMV8818SCCZ-EP - Analog Devices  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

ADMV8818SCCZ-EP Details

  • Manufacturer Part Number:

    ADMV8818SCCZ-EP

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Pin Count:

    56

  • Manufacturer Package Code:

    CC-56-3

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Center or Cutoff Frequency (fo/fc):

    10000 MHz

  • Filter Type:

    HIGH PASS FILTER

  • Height:

    1.03 mm

  • Input Impedance:

    50 OHM

  • JESD-609 Code:

    e4

  • Length:

    9.15 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    1

  • Number of Sections-Min:

    1

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -55 °C

  • Output Impedance:

    50 OHM Ω

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Width:

    9.15 mm

ADMV8818SCCZ-EP Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use short, direct traces for the input and output signals, and avoid routing signals under the device.
  • Use a low-ESR capacitor (e.g., 10uF) between the VCC and GND pins, and a 0.1uF capacitor between the AVCC and AGND pins. Add a 10uF capacitor between the DVCC and DGND pins if using the digital interface. Ensure the power supply is clean and well-regulated.
  • The recommended input signal range is 0.5V to 2.5V, with a maximum input signal amplitude of 2.5V. Signals outside this range may not be accurately converted.
  • Use a low-jitter clock source, and ensure the input signal is properly filtered and terminated. Use a high-quality, low-capacitance PCB material, and minimize the distance between the ADC and the clock source.
  • The maximum clock frequency supported is 1.2 GHz, but the device can operate at lower frequencies with reduced power consumption.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

ADMV8818SCCZ-EP Overview

Use the download button to access the ADMV8818SCCZ-EP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ADMV8, or try a keyword search, such as General Purpose Passive Filters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADMV8818SCCZ-EP

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview