Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADP5070ACPZ-R7 - Analog Devices

Description: ANALOG DEVICES - ADP5070ACPZ-R7 - DC/DC CONV, BOOST/INVERTING, LFCSP-20

Download ADP5070ACPZ-R7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADP5070ACPZ-R7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADP5070ACPZ-R7 - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - ADP5070ACPZ-R7
click to zoom
3D Models
ADP5070ACPZ-R7 - Analog Devices - 3D model - Quad Flat No-Lead - ADP5070ACPZ-R7
click to zoom

ADP5070ACPZ-R7 Details

  • Manufacturer Part Number:

    ADP5070ACPZ-R7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LFCSP-20

  • Pin Count:

    20

  • Manufacturer Package Code:

    CP-20-8

  • Country Of Origin:

    South Korea

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    OPERATES IN ADJUSTABLE MODE UP TO 39V AND NEG VOLT DOWN TO -36.15V

  • Analog IC - Other Type:

    DUAL SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    15 V

  • Input Voltage-Min:

    2.85 V

  • Input Voltage-Nom:

    5 V

  • JESD-30 Code:

    S-XQCC-N20

  • JESD-609 Code:

    e3

  • Length:

    4 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    20

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    1.2 A

  • Output Voltage-Max:

    39 V

  • Output Voltage-Nom:

    15 V

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK-BOOST

  • Switching Frequency-Max:

    2560 kHz

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4 mm

ADP5070ACPZ-R7 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output capacitors close to the device, and use short, wide traces for the power lines. Avoid routing digital signals near the analog inputs.
  • Use a power-on reset (POR) circuit to ensure the device is properly powered up. Configure the device using the EN and SYNC pins. The EN pin should be tied to a voltage source, and the SYNC pin should be tied to a clock signal or a logic high.
  • Use low-ESR ceramic capacitors (e.g., X5R or X7R) with a value of 4.7 μF to 10 μF for the input and output capacitors. The capacitor selection should be based on the specific application requirements and the desired ripple voltage.
  • Use a low-noise voltage regulator to power the device. Add a 10 μF to 22 μF capacitor in parallel with a 1 μF capacitor at the input to filter out high-frequency noise. Ensure good PCB layout practices, such as separating analog and digital grounds, to minimize noise coupling.
  • Use a thermal pad or a heat sink to dissipate heat. Ensure good airflow around the device. The device can operate up to 125°C, but the junction temperature should be kept below 115°C for optimal performance and reliability.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADP5070ACPZ-R7 Overview

Use the download button to access the ADP5070ACPZ-R7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADP50, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for ADP5070ACPZ-R7, you might also be interested in these parts:
Part Number
ADP7142ARDZ
ADP7142ARDZ-5.0-R7
ADP7182AUJZ-R7
TPS51200AQDRCRQ1
TLP3553(F)
SM2000
SM2000GP
SM2000R7
LM2574N-3.3/NOPB

Parts related to ADP5070ACPZ-R7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADP5070ACPZ-R7 Alternates

Showing results

Image Part Number Model
Part Image ADP5070ACPZ Analog Devices Inc

Dual Switching Controller, Current-mode, 1.2A, 2560kHz Switching Freq-Max