ADW1105HTW - Panasonic

ADW1105HTW Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Panasonic recommends a 4-layer PCB with a solid ground plane, and a separate power plane for the input and output. The input and output capacitors should be placed as close as possible to the IC, and the feedback resistors should be placed close to the output pin.
• How do I ensure stability and prevent oscillation?
  To ensure stability, Panasonic recommends using a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Additionally, the feedback resistors should be chosen to ensure a minimum gain margin of 10dB, and a minimum phase margin of 30 degrees.
• What is the maximum ambient temperature for reliable operation?
  The ADW1105HTW is rated for operation up to 125°C, but Panasonic recommends derating the output current by 50% when operating above 105°C to ensure reliable operation.
• How do I protect the device from overvoltage and undervoltage conditions?
  Panasonic recommends using a voltage supervisor or a reset IC to monitor the input voltage and reset the device in case of an overvoltage or undervoltage condition. Additionally, a TVS diode can be used to protect the device from voltage spikes and surges.
• What is the recommended input capacitor type and value?
  Panasonic recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 25V or higher. The input capacitor should be placed as close as possible to the IC.