A good PCB layout for the ADW1124HLW should ensure that the input and output pins are separated, and the power supply lines are decoupled with capacitors. A 4-layer PCB with a solid ground plane is recommended. Additionally, the layout should minimize parasitic inductance and capacitance.
The ADW1124HLW has a high power dissipation, so thermal management is crucial. Ensure good airflow around the device, and consider using a heat sink or thermal pad to dissipate heat. The device's thermal pad should be connected to a solid ground plane or a thermal via to improve heat dissipation.
The recommended input capacitance value is 10uF to 22uF, and the recommended output capacitance value is 10uF to 47uF. However, the optimal capacitance value may vary depending on the specific application and operating conditions.
To ensure stability, ensure that the input voltage is within the recommended range, and the output voltage is set correctly. Also, ensure that the feedback loop is properly compensated, and the output capacitor is properly sized. Additionally, consider adding a soft-start circuit to prevent inrush currents during startup.
The maximum allowable ripple voltage on the input of the ADW1124HLW is typically 1% to 2% of the input voltage. Exceeding this limit may affect the device's performance and stability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ADW1124HLW Overview
Use the download button to access the ADW1124HLW schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADW11,
or try a keyword search, such as Other Relays
