Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADW1203W - Panasonic

Description: 1 Form A 8 A/16 A, Small, Polarized power relays (latching type)

Download ADW1203W Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADW1203W - Panasonic - PCB symbol
click to zoom
PCB Footprints
ADW1203W - Panasonic PCB footprint - Other - Other - ADW1206HTW-2
click to zoom
3D Models
ADW1203W - Panasonic - 3D model - Other - ADW1206HTW-2
click to zoom

ADW1203W Details

  • Manufacturer Part Number:

    ADW1203W

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • Manufacturer:

    Panasonic Electronic Components

  • YTEOL:

    7

  • Body Breadth:

    10 mm

  • Body Height:

    18.8 mm

  • Body Length or Diameter:

    24 mm

  • Coil Current(DC)-Max:

    0.133 A

  • Coil Operate Voltage(DC):

    2.4 V

  • Coil Power:

    400 mW

  • Coil Release Voltage(DC):

    2.4 V

  • Coil Resistance:

    45 Ω

  • Coil Voltage(DC)-Max:

    3 V

  • Coil/Input Supply Type:

    DC

  • Contact (AC) Max Rating R Load:

    8A@250VAC

  • Contact Current(AC)-Max:

    8 A

  • Contact Voltage(AC)-Max:

    250 V

  • Contact/Output Supply Type:

    AC

  • Electrical Life:

    50000 Cycle(s)

  • Mounting Feature:

    THROUGH HOLE-STRAIGHT

  • Operate Time:

    15 ms

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Packing Method:

    BOX

  • Physical Dimension:

    24mm x 10mm x 18.8mm

  • Reference Standard:

    UL; VDE

  • Relay Action:

    LATCHED

  • Relay Function:

    SPST

  • Relay Type:

    POWER/SIGNAL RELAY

  • Release Time:

    15 ms

  • Surface Mount:

    NO

  • Termination Type:

    SOLDER

ADW1203W Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the power supply lines as short as possible and use a 10uF capacitor between VCC and GND for decoupling.
  • Use a thermocouple or a thermistor with a high accuracy rating, and ensure good thermal contact between the sensor and the device being measured. Also, calibrate the ADW1203W according to the datasheet instructions.
  • The maximum cable length is not specified in the datasheet, but as a general rule, keep the cable length as short as possible (less than 1 meter) to minimize noise and ensure accurate measurements.
  • No, the ADW1203W is designed to operate with a 3.3V power supply. Using a 5V power supply may damage the device or affect its performance.
  • Use the thermocouple type selection pins (TSEL0 and TSEL1) to configure the device for the specific thermocouple type. Refer to the datasheet for the correct pin settings for each thermocouple type.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADW1203W Overview

Use the download button to access the ADW1203W schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADW12, or try a keyword search, such as Power/Signal Relays

Parts related to ADW1203W

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑