A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output traces short and away from each other to minimize noise and coupling.
Ensure good airflow around the device, use a heat sink if necessary, and avoid blocking airflow to the device. Also, consider using a thermal interface material to improve heat transfer between the device and the heat sink.
A 10uF to 22uF X7R or X5R ceramic capacitor is recommended for the input capacitor. The capacitor should be placed as close to the VIN pin as possible to minimize noise and ripple.
Use a shielded enclosure, keep the device away from antennas and other EMI-sensitive components, and use a common-mode choke or ferrite bead on the input and output lines to reduce EMI.
The maximum output current capability of the ADW1205HLW is 1.2A. However, the actual output current capability may be limited by the input voltage, output voltage, and ambient temperature.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ADW1205HLW Overview
Use the download button to access the ADW1205HLW schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ADW12,
or try a keyword search, such as Power/Signal Relays
Suggested Parts
If you searched for ADW1205HLW, you might also be interested in these parts: