ADXL356CEZ-RL - Analog Devices

ADXL356CEZ-RL Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  A good PCB layout is crucial for optimal performance. Analog Devices recommends a 4-layer PCB with a solid ground plane, and to keep the accelerometer away from high-frequency components and noise sources. A dedicated analog ground plane is also recommended.
• How do I calibrate the ADXL356CEZ-RL?
  The ADXL356CEZ-RL does not require calibration out of the box, but you may need to perform a zero-g offset calibration depending on your application. This can be done by taking measurements at zero-g and applying the offset to the output data.
• What is the maximum acceleration range I can measure with the ADXL356CEZ-RL?
  The ADXL356CEZ-RL has a maximum acceleration range of ±40 g, but it's recommended to operate within the specified range of ±20 g for optimal performance and accuracy.
• Can I use the ADXL356CEZ-RL in high-temperature applications?
  The ADXL356CEZ-RL is rated for operation up to 125°C, but its accuracy and performance may degrade at high temperatures. It's recommended to consult the datasheet and application notes for temperature-related specifications and considerations.
• How do I filter out noise and vibrations in my measurements?
  The ADXL356CEZ-RL has a built-in filter, but you may need to add additional filtering depending on your application. Analog Devices recommends using a low-pass filter with a cutoff frequency of around 100 Hz to 200 Hz to remove high-frequency noise and vibrations.