IT ALSO HAS NOM-SUPPLY VOLTAGE 3V AND DATA RATE 50 MBD
Body Breadth:
12.7 mm
Body Height:
10.2 mm
Body Length or Diameter:
12.7 mm
Connection Type:
ST CONNECTOR
Emitter/Detector Type:
PHOTODIODE
Fiber Optic Device Type:
RECEIVER
Fiber Type:
50/125, 62.5/125, MMF
JESD-609 Code:
e3
Mounting Feature:
THROUGH HOLE MOUNT
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Operating Wavelength-Max:
865 nm
Operating Wavelength-Min:
792 nm
Operating Wavelength-Nom:
820 nm
Package Style:
DIP
Reception Type:
DIGITAL
Responsivity:
0.72 A/W
Supply Voltage-Max:
5.25 V
Supply Voltage-Min:
3.135 V
Supply Voltage-Nom:
5 V
Surface Mount:
NO
Terminal Finish:
Tin (Sn)
AFBR-2418MZ Frequently Asked Questions (FAQs)
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize signal reflections. A 50-ohm microstrip transmission line should be used to connect the device to the antenna.
The device requires a single 3.3V power supply. A 10uF capacitor should be connected between the VCC pin and ground to filter out noise. A 1kohm resistor should be connected between the EN pin and VCC to enable the device.
The device is rated for operation from -40°C to 85°C. However, the optimal operating temperature range is from 0°C to 70°C for maximum performance and reliability.
Use a spectrum analyzer to check the transmitted signal spectrum and ensure it meets the required specifications. Check the device's power supply and biasing to ensure they are within the recommended range. Use a logic analyzer to check the device's control signals and ensure they are correct.
Yes, the device can be used in a system with multiple antennas. However, the device's output power and antenna selection should be carefully managed to ensure optimal performance and minimize interference.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AFBR-2418MZ Overview
Use the download button to access the AFBR-2418MZ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AFBR-,
or try a keyword search, such as Fiber Optic Receivers
Suggested Parts
If you searched for AFBR-2418MZ, you might also be interested in these parts:
