Abracon recommends a symmetrical PCB layout with a solid ground plane to minimize noise and ensure optimal performance. A minimum of 4-layer PCB is recommended, with the antenna on the top layer, a solid ground plane on the inner layer, and signal traces on the bottom layer.
To ensure reliable antenna performance in a crowded RF environment, Abracon recommends using a shielded enclosure, keeping the antenna at least 10mm away from any metal objects, and using a good quality RF absorber material around the antenna.
The AIAP-01-220K-T antenna is designed to operate in the temperature range of -40°C to +85°C. However, it's recommended to derate the power handling by 1 dB for every 10°C above 60°C to ensure reliable operation.
While the AIAP-01-220K-T antenna is designed for indoor use, it can be used for outdoor applications with proper protection. Abracon recommends using a waterproof coating or conformal coating to protect the antenna from environmental factors such as moisture, dust, and UV radiation.
Abracon recommends using a low-loss, 50Ω coaxial cable with a maximum length of 10 inches (25 cm) to connect the antenna to the module. A longer cable length may result in signal attenuation and reduced performance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AIAP-01-220K-T Overview
Use the download button to access the AIAP-01-220K-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AIAP-,
or try a keyword search, such as Fixed Inductors
