AIAP-02-102K footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AIAP-02-102K Details

Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. Keep the oscillator traces as short as possible and away from noisy signals.
Ensure the power supply is stable and within the recommended range. Add a 10nF to 100nF capacitor between VCC and GND close to the oscillator. Avoid using a capacitor with high ESR.
The maximum frequency deviation is ±100 ppm over the operating temperature range of -40°C to 85°C and supply voltage range of 1.8V to 3.3V.
Yes, but you may need to select the oscillator based on its frequency tolerance. Abracon offers a frequency tolerance of ±20 ppm, ±30 ppm, or ±50 ppm for the AIAP-02-102K. Contact Abracon for custom frequency tolerance options.
The AIAP-02-102K output is a CMOS signal. Use a suitable buffer or logic gate to condition the signal if necessary. Ensure the load capacitance is within the recommended range to prevent signal degradation.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AIAP-02-102K schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AIAP-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →