AIAP-03-151K footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AIAP-03-151K Details

Abracon recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a microstrip transmission line design for the signal traces to minimize signal loss and radiation. A detailed application note is available from Abracon upon request.
The AIAP-03-151K has internal ESD protection diodes that can withstand up to 2kV of electrostatic discharge, meeting the IEC 61000-4-2 standard. However, it's still recommended to follow proper ESD handling procedures during assembly and testing.
The AIAP-03-151K is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency and power handling at higher temperatures to ensure reliable operation.
Yes, the AIAP-03-151K can be used in a push-pull configuration, but it's essential to ensure that the two antennas are properly matched and phased to avoid signal cancellation and radiation pattern distortion.
Abracon recommends using a network analyzer to measure the antenna's impedance and adjust the tuning components accordingly. A simple pi-network or L-network can be used for tuning, and Abracon provides a tuning guide in their application note.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AIAP-03-151K schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AIAP-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →