Abracon recommends a symmetrical layout with the crystal oscillator placed near the center of the PCB, away from noise sources and high-frequency signals. A ground plane underneath the device is also recommended to reduce electromagnetic interference.
To ensure reliable startup, Abracon recommends a power-up ramp time of at least 1 ms, and a power supply voltage that reaches the specified operating voltage (1.8V to 3.3V) within 10 ms. Additionally, the oscillator should be decoupled with a 10 nF to 100 nF capacitor.
The AISC-1008-R15J-T has a specified frequency stability of ±20 ppm over the operating temperature range of -40°C to 85°C. This means that the frequency deviation due to temperature changes should not exceed ±20 ppm.
Yes, the AISC-1008-R15J-T is designed to meet EMI reduction requirements. Abracon recommends using a shielded enclosure, and placing the oscillator away from EMI-sensitive components. Additionally, the device's internal circuitry is designed to minimize EMI emissions.
Abracon recommends storing the AISC-1008-R15J-T in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C and 85°C, and the relative humidity should be below 80%.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AISC-1008-R15J-T Overview
Use the download button to access the AISC-1008-R15J-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AISC-,
or try a keyword search, such as Fixed Inductors
