AISM-1210-470K-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AISM-1210-470K-T Details

Abracon recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a microstrip line on the top layer to minimize signal loss and radiation. A 50-ohm transmission line impedance is recommended for optimal performance.
Abracon recommends using a reflow soldering process with a peak temperature of 260°C (500°F) for 10-15 seconds. Hand soldering is not recommended due to the small size of the component. Ensure the PCB is clean and free of oxidation before soldering.
The AISM-1210-470K-T is rated for operation from -40°C to +85°C. However, it's recommended to derate the frequency and power handling at higher temperatures to ensure reliable operation.
Yes, the AISM-1210-470K-T is designed to withstand vibrations up to 10G peak acceleration. However, it's recommended to ensure the PCB is properly secured and the component is properly soldered to prevent mechanical stress.
Abracon recommends using a network analyzer or spectrum analyzer to measure the frequency response and impedance of the component. Check for proper PCB layout, soldering, and component orientation. Consult the datasheet and application notes for troubleshooting guidelines.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AISM-1210-470K-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AISM-, or try a keyword search, such as Fixed Inductors

Showing 0 results

Image	Part Number	Model
	AISM-1210-470K Abracon Corporation General Purpose Inductor, 47uH, 10%, 1 Element, SMD, 1210
For a full list of alternate parts for AISM-1210-470K-T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →