A symmetrical layout with a central ground plane, minimal track lengths, and a decoupling capacitor (e.g., 10nF) between VCC and GND is recommended. Allegro provides a reference layout in their application note AN296065.
Use a low-impedance current sense resistor (e.g., 1mΩ) and ensure the sense lines are twisted and shielded to minimize noise. Also, use a low-pass filter (e.g., 1kΩ, 10nF) to filter out high-frequency noise.
The output pins are open-drain, so they can tolerate up to the supply voltage (VCC) without damage. However, it's recommended to keep the output voltage below VCC - 0.5V to ensure proper operation.
The ALS31000LLHALX is rated for operation up to 150°C. However, the device's accuracy and reliability may degrade at high temperatures. Consult Allegro's application notes and thermal management guidelines for high-temperature applications.
Check the power supply, decoupling, and PCB layout. Verify the input voltage, current sense resistor, and output pin connections. Use an oscilloscope to inspect the output waveform and check for noise or oscillations. Consult Allegro's application notes and technical support resources for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ALS31000LLHALX Overview
Use the download button to access the ALS31000LLHALX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ALS31,
or try a keyword search, such as Magnetic Field Sensors
