AOTA-B252010S2R2MT - ABRACON

AOTA-B252010S2R2MT Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends following a standard PCB layout for oscillators, with a solid ground plane, minimal signal trace length, and avoiding vias under the oscillator. A 4-layer PCB with a dedicated ground plane is recommended for high-frequency designs.
• How do I ensure the oscillator starts up correctly in my design?
  To ensure proper startup, Abracon recommends applying power to the oscillator with a slow rise time (typically 1-10 ms) and ensuring the power supply is stable before the oscillator is enabled. Additionally, a 10-100 nF decoupling capacitor should be placed close to the oscillator's power pins.
• What is the maximum operating temperature range for this oscillator?
  The AOTA-B252010S2R2MT oscillator is rated for operation from -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and accuracy may degrade at extreme temperatures.
• Can I use this oscillator in a high-vibration environment?
  The AOTA-B252010S2R2MT oscillator is designed to meet the requirements of MIL-STD-883, Method 2007.1, which includes vibration testing. However, it's still essential to evaluate the oscillator's performance in your specific application and environment to ensure it meets your requirements.
• What is the recommended storage condition for this oscillator?
  Abracon recommends storing the AOTA-B252010S2R2MT oscillator in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C and +85°C, and the relative humidity should be below 80%.