Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AP7179DSKZ20-13 - Diodes Incorporated

Description: LDO Voltage Regulators LDO CMOS HiCurr W-QFN3535-20 T&R 5K

Download AP7179DSKZ20-13 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AP7179DSKZ20-13 - Diodes Incorporated - PCB symbol
click to zoom
PCB Footprints
AP7179DSKZ20-13 - Diodes Incorporated PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - W-QFN3535-20 (Type A1)
click to zoom
3D Models
AP7179DSKZ20-13 - Diodes Incorporated - 3D model - Quad Flat No-Lead - W-QFN3535-20 (Type A1)
click to zoom

AP7179DSKZ20-13 Details

  • Manufacturer Part Number:

    AP7179DSKZ20-13

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Diodes Incorporated

  • YTEOL:

    6

  • Regulator Type:

    ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR

AP7179DSKZ20-13 Frequently Asked Questions (FAQs)

  • The recommended PCB layout for optimal thermal performance involves placing thermal vias under the IC, using a solid ground plane, and keeping the thermal path as short as possible. A 4-layer PCB with a dedicated thermal layer is also recommended.
  • To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to place the output capacitor close to the output pin. Additionally, the output voltage should be decoupled from the input voltage using a capacitor.
  • The maximum input voltage that can be applied to the AP7179DSKZ20-13 is 26V, although the recommended maximum input voltage is 24V to ensure reliable operation.
  • The AP7179DSKZ20-13 has built-in overcurrent protection, but it is still recommended to add external overcurrent protection using a fuse or a current limiting resistor to prevent damage to the device and the PCB.
  • The recommended input capacitor value is 1uF to 10uF, and the recommended type is a ceramic capacitor with an X7R or X5R dielectric. The input capacitor should be placed close to the input pin and should have a low ESR.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AP7179DSKZ20-13 Overview

Use the download button to access the AP7179DSKZ20-13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AP717, or try a keyword search, such as Linear Regulator ICs

Parts related to AP7179DSKZ20-13

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑