Please enter a minimum 3 letters or numbers
Technical Content
Part Image

APF30309 - Panasonic

Description: Compliant with European standards, 1 Form A/1 Form C 6 A, Slim power relays

Download APF30309 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
APF30309 - Panasonic - PCB symbol
click to zoom
PCB Footprints
APF30309 - Panasonic PCB footprint - Other - Other - APF_5
click to zoom
3D Models
APF30309 - Panasonic - 3D model - Other - APF_5
click to zoom

APF30309 Details

  • Manufacturer Part Number:

    APF30309

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • Factory Lead Time:

    16 Weeks

  • Manufacturer:

    Panasonic Electronic Components

  • YTEOL:

    7

  • Body Breadth:

    5 mm

  • Body Height:

    15 mm

  • Body Length or Diameter:

    28 mm

  • Coil Current(DC)-Max:

    0.019 A

  • Coil Operate Voltage(DC):

    6.3 V

  • Coil Power:

    170 mW

  • Coil Release Voltage(DC):

    0.45 V

  • Coil Resistance:

    476 Ω

  • Coil Voltage(DC)-Max:

    9 V

  • Coil/Input Supply Type:

    DC

  • Contact (AC) Max Rating R Load:

    6A@250VAC

  • Contact Current(AC)-Max:

    6 A

  • Contact Voltage(AC)-Max:

    250 V

  • Contact/Output Supply Type:

    AC

  • Electrical Life:

    50000 Cycle(s)

  • Mounting Feature:

    THROUGH HOLE-STRAIGHT

  • Operate Time:

    8 ms

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Packing Method:

    BOX; TUBE

  • Physical Dimension:

    28mm x 5mm x 15mm

  • Reference Standard:

    UL; VDE

  • Relay Action:

    MOMENTARY

  • Relay Function:

    SPDT

  • Relay Type:

    POWER/SIGNAL RELAY

  • Release Time:

    4 ms

  • Sealing:

    WATER PROOF

  • Surface Mount:

    NO

  • Termination Type:

    SOLDER

APF30309 Frequently Asked Questions (FAQs)

  • A good PCB layout for the APF30309 should consider the following: keep the input and output traces short and separate, use a solid ground plane, and place decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
  • To ensure the APF30309 operates within the specified temperature range, make sure to provide adequate heat dissipation through a heat sink or thermal pad, and avoid exposing the device to extreme temperatures during storage or operation.
  • The recommended input capacitor value is 10uF to 22uF, and a low-ESR ceramic capacitor (X5R or X7R dielectric) is recommended. The capacitor should be placed as close to the VIN pin as possible.
  • The enable pin (EN) should be pulled high during power-up and power-down sequences to ensure proper operation. A pull-up resistor with a value between 1kΩ to 10kΩ is recommended.
  • The maximum allowed voltage on the output pin (VOUT) during startup or shutdown is 6V. Exceeding this voltage may damage the device.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

APF30309 Overview

Use the download button to access the APF30309 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APF30, or try a keyword search, such as Power/Signal Relays

Parts related to APF30309

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑