Allegro recommends a 2-layer PCB with a solid ground plane on the bottom layer and a thermal relief pattern on the top layer to ensure good thermal conductivity. Additionally, keeping the PCB traces away from the device's thermal pad and using a thermal via array can help to dissipate heat efficiently.
To ensure accurate current sensing, it's essential to follow proper PCB layout guidelines, such as keeping the sense lines short and away from noise sources, using a Kelvin connection to the sense resistor, and minimizing the resistance of the sense lines. Additionally, calibrating the device and using a high-precision sense resistor can also improve accuracy.
Although the datasheet specifies a recommended operating voltage range of 3.3V to 5.5V, Allegro recommends not exceeding 5.25V on the VCC pin to ensure reliable operation and prevent damage to the device.
While the APS11200LLHALT is rated for operation up to 150°C, Allegro recommends derating the device's current handling capability at higher temperatures to prevent thermal runaway. Consult Allegro's application notes for guidance on high-temperature operation.
To troubleshoot overcurrent protection issues, check the device's fault pin (FAULT) for proper operation, verify that the sense resistor is properly connected and calibrated, and ensure that the device is not overheating. Consult Allegro's application notes and technical support resources for further guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APS11200LLHALT Overview
Use the download button to access the APS11200LLHALT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APS11,
or try a keyword search, such as Magnetic Field Sensors
