Allegro provides a recommended PCB layout in their application note AN296050, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and minimize noise.
To minimize output voltage ripple and noise, use a suitable output capacitor with low ESR, and consider adding a filter capacitor (e.g., 10uF) in parallel with the output capacitor. Additionally, ensure good PCB layout and decoupling practices.
The maximum allowed voltage on the enable pin (EN) is VCC + 0.3V, which is 5.3V for the APS11450LUAA-0SLA. Exceeding this voltage may damage the device.
The APS11450LUAA-0SLA is rated for operation up to 125°C (TJ). However, it's essential to consider the device's power dissipation, thermal management, and potential derating at high temperatures to ensure reliable operation.
Power dissipation (PD) can be calculated using the formula: PD = (VIN x IIN) + (VOUT x IOUT) + (VCC x ICC). Consider the device's efficiency, input and output currents, and voltage drops to estimate the power dissipation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APS11450LUAA-0SLA Overview
Use the download button to access the APS11450LUAA-0SLA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APS11,
or try a keyword search, such as Magnetic Field Sensors
