Allegro provides a recommended PCB layout in their application note AN296050, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and minimize noise.
To minimize output voltage ripple and noise, use a suitable output capacitor with low ESR, and consider adding a filter capacitor (e.g., 10uF) in parallel with the output capacitor. Additionally, ensure good PCB layout and decoupling practices.
Although the datasheet specifies a maximum VIN of 40V, it's recommended to limit the voltage to 36V to ensure reliable operation and prevent damage to the device.
While the device is rated for operation up to 150°C, it's essential to consider the junction temperature (TJ) and ensure it remains within the specified range (TJ ≤ 150°C) to prevent thermal shutdown or damage.
The APS12060LLHALT-0L has a built-in OCP feature that limits the output current to 120% of the rated current. To implement OCP, connect a sense resistor (Rs) between the output pin and GND, and use an external circuit to monitor the voltage across Rs and trigger a shutdown or warning signal when the current exceeds the desired limit.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APS12060LLHALT-0L Overview
Use the download button to access the APS12060LLHALT-0L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APS12,
or try a keyword search, such as Magnetic Field Sensors
