A good PCB layout for the APS13290KUAA should minimize noise and ensure proper thermal dissipation. Allegro recommends a 4-layer PCB with a solid ground plane, and placing the device near the center of the board. Additionally, keep the sense lines short and away from high-current paths.
Calibration involves adjusting the zero-current offset and sensitivity of the device. Allegro provides a calibration procedure in the datasheet, which involves applying a known current and measuring the output voltage. The device can also be calibrated using an external calibration resistor.
The maximum allowable voltage on the VCC pin is 5.5V. Exceeding this voltage can damage the device. It's recommended to use a voltage regulator or a voltage clamp to ensure the VCC pin remains within the specified range.
The APS13290KUAA is rated for operation up to 150°C. However, the device's accuracy and reliability may degrade at high temperatures. It's recommended to derate the device's performance and consider using thermal management techniques, such as heat sinks or thermal interfaces, to maintain a safe operating temperature.
To minimize EMI, use a shielded cable for the sense lines, keep the sense lines short, and avoid routing them near high-current paths or noise sources. Additionally, use a common-mode filter or a ferrite bead to suppress high-frequency noise.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APS13290KUAA Overview
Use the download button to access the APS13290KUAA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APS13,
or try a keyword search, such as Magnetic Field Sensors
