Allegro provides a recommended PCB layout in their application note AN296040, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and minimize noise.
The thermal shutdown feature is designed to protect the device from overheating. When the device exceeds the thermal shutdown threshold, it will shut down until the temperature drops below the hysteresis point. To handle this, ensure proper thermal design, use a heat sink if necessary, and implement a thermal monitoring and shutdown strategy in your system design.
Although the datasheet specifies a maximum VCC voltage of 5.5V, it's recommended to limit the voltage to 5V to ensure reliable operation and prevent damage to the device.
Calibration is not required for the APS13295KLHALT, as it is a factory-calibrated device. However, you may need to perform system-level calibration depending on your specific application requirements.
Allegro recommends a 10nF to 100nF ceramic capacitor for VCC bypassing, placed as close to the VCC pin as possible, to filter out noise and ensure stable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APS13295KLHALT Overview
Use the download button to access the APS13295KLHALT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APS13,
or try a keyword search, such as Magnetic Field Sensors
