AR0134CSSC00SUEA0-DPBR footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

AR0134CSSC00SUEA0-DPBR Details

Manufacturer Part Number:
AR0134CSSC00SUEA0-DPBR
Brand Name:
onsemi
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Obsolete
Part Package Code:
IBGA-63
Package Description:
9 X 9 MM, IBGA-63
Manufacturer Package Code:
503AG
Country Of Origin:
Taiwan
Factory Lead Time:
4 Weeks
Manufacturer:
onsemi
YTEOL:
0
Additional Feature:
ELECTRONIC ROLLING SHUTTER, IT ALSO OPERATES AT ANALOG SUPPLY VOLTAGE 2.5-3.1V
Array Type:
SINGLE FRAME
Body Breadth:
9 mm
Body Height:
1.4 mm
Body Length or Diameter:
9 mm
Dynamic Range:
64 dB
Frame Rate:
60 fps
Horizontal Pixel:
1280
JESD-609 Code:
e1
Master Clock:
50 MHz
Mounting Feature:
SURFACE MOUNT
Operating Current-Max:
60 mA
Operating Temperature-Max:
70 °C
Operating Temperature-Min:
-30 °C
Optical Format:
1/3 inch
Output Interface Type:
2-WIRE INTERFACE
Output Range:
-22-22mA
Output Type:
DIGITAL CURRENT
Package Shape/Style:
SQUARE
Pixel Size:
3.75 µm
Sensors/Transducers Type:
IMAGE SENSOR,CMOS
Spectral Response (nm):
350-1050
Supply Voltage-Max:
1.95 V
Supply Voltage-Min:
1.7 V
Surface Mount:
YES
Terminal Finish:
TIN SILVER COPPER
Termination Type:
SOLDER
Vertical Pixel:
960

The recommended PCB layout for the AR0134CSSC00SUEA0-DPBR can be found in the Onsemi application note AND9313/D, which provides guidelines for designing a PCB that meets the sensor's electrical and thermal requirements.
To optimize the AR0134CSSC00SUEA0-DPBR's performance in low-light conditions, adjust the exposure time, gain, and black level calibration. Additionally, consider using a lens with a high f-number and optimizing the sensor's analog gain and digital gain settings.
The maximum clock frequency for the AR0134CSSC00SUEA0-DPBR is 72 MHz, as specified in the datasheet. However, the actual clock frequency may vary depending on the system design and application requirements.
To implement lens shading correction for the AR0134CSSC00SUEA0-DPBR, use a lens shading correction table or algorithm that compensates for the optical vignetting and distortion introduced by the lens. This can be done using software or firmware in the image processing pipeline.
The recommended power-up sequence for the AR0134CSSC00SUEA0-DPBR is to first power up the analog supply (VAA), followed by the digital supply (VDD), and then the clock signal. This ensures proper initialization and operation of the sensor.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AR0134CSSC00SUEA0-DPBR schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AR013, or try a keyword search, such as Image Sensors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →