AR0135CS2C00SUEA0-DPBR footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

AR0135CS2C00SUEA0-DPBR Details

Manufacturer Part Number:
AR0135CS2C00SUEA0-DPBR
Brand Name:
onsemi
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Active
Part Package Code:
IBGA-63
Manufacturer Package Code:
503AZ
Country Of Origin:
Taiwan
Factory Lead Time:
20 Weeks
Date Of Intro:
2016-07-27
Manufacturer:
onsemi
YTEOL:
6
Additional Feature:
GLOBAL SHUTTER; IT ALSO OPERATES AT ANALOG VOLTAGE OF 2.5 V TO 3.1 V
Array Type:
FRAME
Body Breadth:
9 mm
Body Height:
1.39 mm
Body Length or Diameter:
9 mm
Dynamic Range:
71.1 dB
Frame Rate:
54 fps
Horizontal Pixel:
1280
JESD-609 Code:
e1
Master Clock:
50 MHz
Mounting Feature:
SURFACE MOUNT
Operating Current-Max:
90 mA
Operating Temperature-Max:
70 °C
Operating Temperature-Min:
-30 °C
Optical Format:
1/3 inch
Output Interface Type:
2-WIRE INTERFACE
Output Range:
0.40-1.50V
Output Type:
DIGITAL VOLTAGE
Package Shape/Style:
SQUARE
Pixel Size:
3.75 µm
Sensors/Transducers Type:
IMAGE SENSOR,CMOS
Supply Voltage-Max:
1.95 V
Supply Voltage-Min:
1.7 V
Surface Mount:
YES
Terminal Finish:
Tin/Silver/Copper (Sn/Ag/Cu)
Termination Type:
SOLDER
Vertical Pixel:
960

The recommended PCB layout and thermal management guidelines can be found in the onsemi application note AND9133/D, which provides detailed information on PCB design, thermal management, and layout considerations to ensure optimal performance and reliability.
To optimize the AR0135CS2C00SUEA0-DPBR's performance in low-light conditions, it is recommended to adjust the exposure time, gain, and black level calibration. Additionally, using a lens with a high f-number and optimizing the sensor's analog gain can also improve low-light performance.
The maximum clock frequency for the AR0135CS2C00SUEA0-DPBR is 180 MHz. Increasing the clock frequency can improve the sensor's performance, but it also increases power consumption. A higher clock frequency can also generate more heat, so thermal management is crucial.
Lens distortion correction can be implemented using software or hardware-based solutions. Software-based solutions involve using algorithms to correct for distortion, while hardware-based solutions use specialized ICs or FPGAs. onsemi provides a lens distortion correction algorithm in their software development kit (SDK) for the AR0135CS2C00SUEA0-DPBR.
The recommended power-up sequence is to first apply the analog power supply (AVDD), followed by the digital power supply (DVDD), and then the clock signal. During power-down, the sequence should be reversed. It is essential to follow the recommended power-up and power-down sequence to prevent damage to the device.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AR0135CS2C00SUEA0-DPBR schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AR013, or try a keyword search, such as Image Sensors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →