A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a decoupling capacitor (e.g., 100nF) close to the device.
Use a clean and stable power supply with a voltage regulator (e.g., 3.3V or 5V) and decouple the power pins with capacitors (e.g., 10uF and 100nF). Ensure the power supply can provide the required current (typically 100mA).
The recommended clock frequency is 25MHz, but it can operate up to 50MHz. However, higher frequencies may require additional decoupling capacitors and careful PCB layout.
Use a 3.3V or 5V tolerant microcontroller and ensure the communication protocol (e.g., SPI or I2C) is compatible with the AR1820HSSC00SHEA0-DP1. Use a level shifter if the microcontroller's voltage is different from the AR1820HSSC00SHEA0-DP1's supply voltage.
The typical current consumption is around 50mA, but it can vary depending on the operating mode, clock frequency, and output loading. Refer to the datasheet for specific current consumption values.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AR1820HSSC00SHEA0-DP1 Overview
Use the download button to access the AR1820HSSC00SHEA0-DP1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AR182,
or try a keyword search, such as Image Sensors
