Abracon recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a microstrip transmission line design for the signal traces to minimize signal loss and radiation.
The ARJE-0034 requires a 10kΩ ±1% resistor in series with the output to ensure proper termination and prevent signal reflections. Abracon also recommends a 10nF ±10% capacitor in parallel with the output for additional filtering.
Abracon recommends a 10uF ±10% capacitor in parallel with a 100nF ±10% capacitor, both connected as close as possible to the VCC pin, to ensure stable power supply decoupling and minimize noise.
The ARJE-0034 is rated for commercial temperature range (0°C to 70°C). For harsh environments, Abracon offers industrial (-40°C to 85°C) and automotive (-40°C to 125°C) grade options. Consult the datasheet or contact Abracon for specific requirements.
Check the power supply voltage, ensure proper termination, and verify the PCB layout. Use an oscilloscope to measure the output signal and verify it meets the datasheet specifications. Consult the datasheet or contact Abracon's technical support for further assistance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ARJE-0034 Overview
Use the download button to access the ARJE-0034 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ARJE-,
or try a keyword search, such as Telecom and Datacom Connectors
