A symmetrical PCB layout with a solid ground plane and minimal signal trace length is recommended. The device should be placed close to the magnet and the PCB should be designed to minimize electromagnetic interference.
Calibration involves rotating the magnet 360 degrees while taking measurements. The device has an internal calibration routine that can be triggered by applying a specific sequence of pulses to the EN pin. Refer to the application note for detailed calibration procedure.
The device is rated for operation from -40°C to 150°C. However, the accuracy of the angle measurements may degrade at extreme temperatures. It is recommended to characterize the device's performance over the desired operating temperature range.
The device is optimized for use with the recommended magnet dimensions and material. Using a different magnet may affect the accuracy and linearity of the angle measurements. It is recommended to consult with the manufacturer or perform thorough characterization before using a non-standard magnet.
The device has built-in error detection and correction mechanisms. In case of errors, the device will output an error code on the SPI interface. The application note provides guidance on error handling and fault detection.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AS5147P-HTSM Overview
Use the download button to access the AS5147P-HTSM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AS514,
or try a keyword search, such as Rotary Position Sensors
