The recommended PCB layout involves placing the device on a 4-layer board with a solid ground plane, using thermal vias to dissipate heat, and keeping the thermal pad connected to the ground plane. Ams OSRAM provides a reference design and layout guidelines in their application notes.
The AS6214-AWLT-S has built-in overvoltage protection (OVP) and undervoltage lockout (UVLO) features. OVP protects the device from voltage transients up to 20V, while UVLO ensures the device remains in a low-power state when the input voltage falls below 2.5V.
The maximum allowable current for the output pins is 20mA per pin, with a total current limit of 50mA for all output pins combined. Exceeding these limits may cause damage to the device.
The AS6214-AWLT-S has a power-up sequence that ensures the output pins are in a high-impedance state until the device is fully powered up. During power-down, the device enters a low-power state, and the output pins are driven low to minimize power consumption.
The AS6214-AWLT-S has built-in ESD protection, but it's still recommended to follow standard ESD handling procedures when handling the device. Ams OSRAM recommends using an ESD wrist strap or mat, and storing the device in an ESD-protected environment.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AS6214-AWLT-S Overview
Use the download button to access the AS6214-AWLT-S schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AS621,
or try a keyword search, such as Temperature Sensors
