ASPI-0310FS-6R8M-T2 - ABRACON

ASPI-0310FS-6R8M-T2 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends a symmetrical PCB layout with a solid ground plane, and keeping the oscillator away from high-frequency noise sources. A 4-layer PCB with a dedicated ground plane is ideal.
• How do I ensure the oscillator starts up reliably in my design?
  Ensure the power supply is stable and within the recommended voltage range. Add a 10nF to 100nF decoupling capacitor between VCC and GND, and a 1kΩ to 10kΩ pull-up resistor on the output pin to improve startup reliability.
• What is the maximum operating temperature range for this oscillator?
  The ASPI-0310FS-6R8M-T2 is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency tolerance by ±0.05ppm/°C for temperatures above +70°C.
• Can I use this oscillator in a high-vibration environment?
  Yes, the ASPI-0310FS-6R8M-T2 is designed to withstand vibrations up to 20G peak acceleration, but it's recommended to follow Abracon's guidelines for vibration testing and ensure proper PCB mounting and soldering.
• How do I handle ESD protection for this oscillator?
  Abracon recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the oscillator's input and output pins to prevent damage from electrostatic discharge.