ASPI-0418FS-151M-T3 - ABRACON

ASPI-0418FS-151M-T3 Frequently Asked Questions (FAQs)

• What is the recommended termination resistance for this oscillator?
  The recommended termination resistance for the ASPI-0418FS-151M-T3 is 1 kΩ to ensure proper signal integrity and minimize reflections.
• Can I use this oscillator in a harsh environment with high temperatures?
  While the ASPI-0418FS-151M-T3 is rated for industrial temperature range (-40°C to 85°C), it's essential to consider the specific application's requirements and potential derating factors. Consult with Abracon's application engineers or perform thorough testing to ensure the oscillator's reliability in your specific environment.
• How do I ensure the oscillator's output signal is properly decoupled from the power supply?
  To decouple the oscillator's output signal from the power supply, use a 0.01 μF to 0.1 μF capacitor between the VCC pin and GND, and a 10 Ω to 100 Ω series resistor between the output pin and the load. This helps to filter out noise and prevent power supply noise from affecting the oscillator's performance.
• What is the typical start-up time for this oscillator?
  The typical start-up time for the ASPI-0418FS-151M-T3 is around 5 ms to 10 ms. However, this can vary depending on the specific application, power supply, and environmental conditions.
• Can I use this oscillator in a design with multiple power domains?
  Yes, the ASPI-0418FS-151M-T3 can be used in designs with multiple power domains. However, ensure that the oscillator's power supply is properly isolated and decoupled from other power domains to prevent noise and interference.