ASPI-0628-150M-T1 - ABRACON

ASPI-0628-150M-T1 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and land pattern for optimal performance?
  Abracon recommends following the IPC-7351B standard for land pattern design and PCB layout. A minimum of 2 oz copper thickness and a 1.5 mm keep-out area around the oscillator are recommended for optimal performance and thermal management.
• How does the oscillator behave during power-up and power-down sequences?
  The ASPI-0628-150M-T1 oscillator is designed to start oscillating within 5 ms after power-up, and it will continue to oscillate until the power supply voltage drops below 1.5 V. During power-down, the oscillator will stop oscillating when the power supply voltage drops below 1.5 V.
• What is the maximum allowable frequency deviation over temperature and voltage?
  The ASPI-0628-150M-T1 oscillator is specified to have a maximum frequency deviation of ±50 ppm over the operating temperature range of -40°C to 85°C and supply voltage range of 1.8 V to 3.3 V.
• Can the oscillator be used in a system with high electromagnetic interference (EMI)?
  Yes, the ASPI-0628-150M-T1 oscillator is designed to meet the EMI requirements of most applications. However, it's recommended to follow proper PCB design and layout practices, such as using a ground plane and shielding, to minimize EMI effects.
• What is the recommended storage condition to prevent damage or degradation?
  Abracon recommends storing the ASPI-0628-150M-T1 oscillator in a dry, cool place with a temperature range of -40°C to 30°C and relative humidity below 60%. The device should be stored in its original packaging or an equivalent ESD-protective package.