ASPI-0704S-181M-T - ABRACON

ASPI-0704S-181M-T Frequently Asked Questions (FAQs)

• What is the recommended termination resistance for the ASPI-0704S-181M-T?
  The recommended termination resistance is 1 kΩ to ensure proper signal integrity and minimize reflections.
• Can I use the ASPI-0704S-181M-T in a harsh environment with high temperatures?
  While the ASPI-0704S-181M-T is rated for industrial temperature range (-40°C to 85°C), it's essential to consider the specific application's temperature requirements and potential derating factors. Consult with Abracon's application engineers for customized guidance.
• How do I ensure the oscillator's output signal is properly decoupled from the power supply noise?
  Use a 0.01 μF to 0.1 μF decoupling capacitor between the VDD pin and GND, and a 10 μF to 22 μF bulk capacitor between VDD and GND to filter out power supply noise and ensure a clean output signal.
• What is the recommended PCB layout and routing for the ASPI-0704S-181M-T?
  Keep the oscillator's output trace as short as possible, and use a controlled impedance trace (e.g., 50 Ω) to minimize signal degradation. Avoid routing the output trace near noise-sensitive components or high-current paths.
• Can I use the ASPI-0704S-181M-T in a design that requires low EMI emissions?
  Yes, the ASPI-0704S-181M-T is designed to minimize EMI emissions. However, it's crucial to follow proper PCB layout and design guidelines, such as using a ground plane, shielding, and minimizing signal loop areas, to ensure compliance with EMI regulations.