Abracon recommends a symmetrical PCB layout with a solid ground plane, and the use of vias to connect the ground plane to the device's ground pins. This helps to reduce noise and improve signal integrity.
To ensure the oscillator starts up correctly, Abracon recommends applying power to the VCC pin before applying a clock signal to the CLK pin. Additionally, the VCC pin should be decoupled with a 0.1uF capacitor to reduce noise.
The ASPI-2010-2R2M-T is rated for operation from -40°C to +85°C. However, it's recommended to derate the frequency and voltage specifications for operation above 70°C to ensure reliable performance.
Yes, the ASPI-2010-2R2M-T is designed to operate in high-vibration environments. However, it's recommended to follow Abracon's guidelines for mounting and soldering to ensure the device is securely attached to the PCB.
To troubleshoot issues with the oscillator not oscillating, check the power supply voltage, ensure the CLK pin is not loaded, and verify the correct PCB layout and termination. Also, check for any damage to the device or PCB during handling or assembly.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASPI-2010-2R2M-T Overview
Use the download button to access the ASPI-2010-2R2M-T schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-,
or try a keyword search, such as Fixed Inductors
