ASPI-2010HC-2R2M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

ASPI-2010HC-2R2M-T Details

Abracon recommends following a 4-layer PCB stack-up with a solid ground plane on the bottom layer, and using a microstrip or stripline configuration for the transmission lines. Additionally, keeping the signal traces short and away from noise sources is crucial for optimal performance.
The ASPI-2010HC-2R2M-T has internal ESD protection diodes that can withstand up to 2kV human body model (HBM) and 100V machine model (MM) ESD events. However, it's still recommended to follow proper ESD handling procedures during assembly and testing.
The ASPI-2010HC-2R2M-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency and power handling at higher temperatures to ensure reliable operation.
The ASPI-2010HC-2R2M-T is designed to meet the requirements of MIL-STD-202, Method 204, for vibration and shock. However, it's recommended to perform additional testing and validation for specific application requirements.
The ASPI-2010HC-2R2M-T is designed to operate with a power supply voltage range of 3.3V ±10%. It's recommended to use a low-noise power supply and to follow proper power supply decoupling and filtering techniques to minimize the impact of power supply noise and ripple.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-2010HC-2R2M-T schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →