ASPI-2512-3R3M-T2 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPI-2512-3R3M-T2 Details

Abracon recommends a land pattern with a pad size of 1.3mm x 0.8mm and a spacing of 0.5mm between pads. The recommended land pattern is available in the Abracon Application Note AN-01.
Yes, the ASPI-2512-3R3M-T2 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to consult with Abracon's application engineers for specific guidance on using the device in high-temperature environments.
The ASPI-2512-3R3M-T2 is a sensitive device and requires careful handling during PCB assembly. It's recommended to follow standard ESD precautions, such as using an ESD wrist strap or mat, and to avoid touching the device's pins or body. Additionally, the device should be stored in a dry, cool place, away from direct sunlight.
The ASPI-2512-3R3M-T2 is not hermetically sealed and is sensitive to moisture. It's recommended to use the device in environments with a relative humidity of 60% or less. If the device is exposed to high humidity, it may be necessary to use conformal coating or other moisture-protection measures.
Abracon recommends a soldering profile with a peak temperature of 260°C and a dwell time of 10-30 seconds. The recommended soldering profile is available in the Abracon Application Note AN-02.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-2512-3R3M-T2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →