ASPI-4020S-6R8M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPI-4020S-6R8M-T Details

Abracon recommends following a 4-layer PCB stack-up with a solid ground plane on the bottom layer, and using a microstrip or stripline configuration for the signal traces. Additionally, keeping the signal traces short and using 50-ohm impedance matching can help optimize performance.
The ASPI-4020S-6R8M-T has built-in ESD protection up to 2kV human body model (HBM) and 100V machine model (MM). However, for surge protection, Abracon recommends using external surge protection devices, such as TVS diodes, to ensure compliance with relevant industry standards.
The ASPI-4020S-6R8M-T is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency and power handling at higher temperatures to ensure reliable operation.
The ASPI-4020S-6R8M-T is designed to meet the requirements of MIL-STD-202, but Abracon recommends consulting with their application engineers to determine the suitability of the device for specific high-vibration or high-shock environments.
Abracon recommends following the JEDEC J-STD-020D.1 standard for soldering, with a peak temperature of 260°C and a dwell time of 30-60 seconds. However, it's essential to consult with Abracon's application engineers for specific guidance on soldering profiles.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-4020S-6R8M-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

Showing 0 results

Image	Part Number	Model
	SDIA0420MT6R8 Viking Tech Corp General Purpose Inductor, 6.8uH, 20%, 1 Element, SMD, 1616
For a full list of alternate parts for ASPI-4020S-6R8M-T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →