ASPI-4020S-7R5M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPI-4020S-7R5M-T Details

Abracon recommends following a 4-layer PCB stack-up with a solid ground plane on the bottom layer, and using a microstrip or stripline configuration for the signal traces. Additionally, keeping the signal traces short and using 50-ohm impedance matching can help optimize performance.
The ASPI-4020S-7R5M-T has internal ESD protection diodes that can withstand up to 2kV human body model (HBM) and 100V machine model (MM) ESD events. However, it's still recommended to follow proper ESD handling and storage procedures to prevent damage.
The ASPI-4020S-7R5M-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency and power handling at higher temperatures to ensure reliable operation.
The ASPI-4020S-7R5M-T is designed to meet the requirements of MIL-STD-202, Method 204, for vibration and shock. However, it's recommended to perform additional testing and validation to ensure the device meets the specific requirements of the target application.
Abracon recommends following a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a ramp rate of 3°C/second. It's also recommended to use a nitrogen atmosphere and a solder with a melting point above 217°C.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-4020S-7R5M-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →