ASPI-6045S-331M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPI-6045S-331M-T Details

Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. The oscillator output should be routed as a differential pair, and the PCB should be designed to minimize noise and EMI.
The ASPI-6045S-331M-T requires a 50-ohm termination resistor on the output pins to ensure proper signal integrity. The termination resistor should be placed as close to the output pins as possible.
Abracon recommends using a 10uF ceramic capacitor in parallel with a 100nF ceramic capacitor, both connected between the VCC pin and GND pin, to ensure proper power supply decoupling.
The ASPI-6045S-331M-T can be configured for a different output frequency by using an external resistor and capacitor network. Abracon provides a frequency calculation tool on their website to help with this process.
The ASPI-6045S-331M-T has an operating temperature range of -40°C to +85°C. However, the device can be operated at temperatures up to +105°C with reduced performance and reliability.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-6045S-331M-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

If you searched for ASPI-6045S-331M-T, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →