ASPI-8040S-910M-T - ABRACON

ASPI-8040S-910M-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends following the recommended PCB layout guidelines in the datasheet, including using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines for the clock and data lines.
• How do I ensure proper thermal management for this oscillator?
  Abracon recommends mounting the oscillator on a PCB with a solid ground plane, using thermal vias to dissipate heat, and keeping the oscillator away from heat sources. The recommended operating temperature range is -40°C to +85°C.
• What is the typical start-up time for this oscillator?
  The typical start-up time for the ASPI-8040S-910M-T is around 1-2 ms, but this can vary depending on the specific application and operating conditions.
• Can I use this oscillator in a harsh environment, such as high vibration or shock?
  The ASPI-8040S-910M-T is designed to meet the requirements of MIL-STD-883, Method 2002.6, which includes vibration and shock testing. However, it's recommended to consult with Abracon's application engineers to ensure the oscillator meets the specific requirements of your application.
• What is the recommended power supply decoupling for this oscillator?
  Abracon recommends using a 10-100 nF decoupling capacitor between the VCC pin and the GND pin, placed as close to the oscillator as possible, to ensure stable operation and minimize noise.