Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. The oscillator output should be routed as a differential pair, and the power supply lines should be decoupled with 10nF capacitors.
Abracon recommends using a reflow soldering process with a peak temperature of 260°C. The component should be placed on a flat, clean PCB surface, and the solder paste should be applied according to the manufacturer's instructions.
The ASPIAIG-Q1510-100M-T is rated for operation from -40°C to +85°C, but it can be customized for extended temperature ranges upon request.
Yes, the ASPIAIG-Q1510-100M-T is designed to meet the requirements of MIL-STD-202, Method 204, Condition D for vibration and MIL-STD-202, Method 213, Condition I for shock.
Abracon recommends checking the power supply voltage, PCB layout, and soldering quality. Also, ensure that the oscillator is properly decoupled and that there are no nearby noise sources. If issues persist, contact Abracon's technical support for further assistance.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASPIAIG-Q1510-100M-T Overview
Use the download button to access the ASPIAIG-Q1510-100M-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASPIA,
or try a keyword search, such as Fixed Inductors
