ASPIAIG-S6055-6R8M-T - ABRACON

ASPIAIG-S6055-6R8M-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends following the recommended PCB layout guidelines provided in the application note AN-03, which includes using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines for the clock and data lines.
• How do I ensure the oscillator is properly terminated?
  The ASPIAIG-S6055-6R8M-T requires a 10kΩ ±1% resistor in series with a 10pF ±10% capacitor to ground for proper termination. This ensures the oscillator is properly loaded and minimizes jitter and phase noise.
• What is the recommended power supply decoupling for this oscillator?
  Abracon recommends using a 10uF ±10% ceramic capacitor and a 100nF ±10% ceramic capacitor in parallel, placed as close as possible to the VCC pin, to ensure proper power supply decoupling and noise reduction.
• Can I use this oscillator in a high-temperature environment?
  The ASPIAIG-S6055-6R8M-T is rated for operation up to 85°C, but Abracon recommends derating the frequency by 0.05% per degree Celsius above 70°C to ensure reliable operation in high-temperature environments.
• How do I troubleshoot issues with the oscillator not oscillating?
  Check the power supply voltage, ensure proper termination and decoupling, and verify the PCB layout follows the recommended guidelines. If issues persist, contact Abracon's technical support for further assistance.