ASX340AT2C00XPED0-DRBR footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

ASX340AT2C00XPED0-DRBR Details

Manufacturer Part Number:
ASX340AT2C00XPED0-DRBR
Brand Name:
onsemi
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Obsolete
Manufacturer Package Code:
503AE
Country Of Origin:
Malaysia, Taiwan
Manufacturer:
onsemi
YTEOL:
0
Additional Feature:
IT ALSO HAVE ANALOG SUPPLY VOLTAGE 2.66-2.94 V, ELECTRONIC ROLLING SHUTTER
Array Type:
FRAME
Body Breadth:
7.5 mm
Body Height:
1.28 mm
Body Length or Diameter:
7.5 mm
Data Rate:
27 Mbps
Dynamic Range:
87 dB
Frame Rate:
60 fps
Horizontal Pixel:
728
Housing:
PLASTIC
Master Clock:
27 MHz
Mounting Feature:
SURFACE MOUNT
Operating Current-Max:
50 mA
Operating Temperature-Max:
105 °C
Operating Temperature-Min:
-40 °C
Optical Format:
1/4 inch
Output Interface Type:
2-WIRE INTERFACE
Output Range:
0.84-1.96V
Output Type:
DIGITAL VOLTAGE
Package Shape/Style:
SQUARE
Pixel Size:
5.6X5.6 µm
Sensors/Transducers Type:
IMAGE SENSOR,CMOS
Spectral Response (nm):
350-1050
Supply Voltage-Max:
1.95 V
Supply Voltage-Min:
1.7 V
Surface Mount:
YES
Termination Type:
SOLDER
Vertical Pixel:
560

A 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or heat sink to dissipate heat efficiently.
Ensure that the device is operated within the recommended voltage and current limits, and that the PCB is designed to minimize thermal resistance. Also, consider using thermal management techniques such as heat sinks or thermal interfaces.
The ASX340AT2C00XPED0-DRBR has built-in ESD protection, but it's still recommended to follow standard ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure that the device is handled in a static-safe environment.
Yes, the ASX340AT2C00XPED0-DRBR is qualified for automotive and high-reliability applications. However, additional testing and validation may be required to meet specific industry standards or customer requirements.
Follow the recommended soldering profile and rework conditions outlined in the onsemi application note AN1163. Use a soldering iron with a temperature range of 220-240°C, and avoid exposing the device to excessive heat or moisture.

Community Provided

System Verified

Community Approved

Use the download button to access the ASX340AT2C00XPED0-DRBR schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASX34, or try a keyword search, such as Image Sensors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →