Skyworks provides a recommended PCB layout and land pattern in their application note AN302A, which can be found on their website. It's essential to follow these guidelines to ensure optimal performance and minimize parasitic effects.
The ATN3590-08 has a thermal pad on the bottom of the package, which should be connected to a thermal ground plane on the PCB. Ensure good thermal conductivity by using a thermal interface material (TIM) and a heat sink if necessary. Refer to the Skyworks application note AN2008 for more information on thermal management.
The ATN3590-08 is rated for operation from -40°C to +85°C. However, it's essential to note that the device's performance may degrade at higher temperatures, and the maximum junction temperature (Tj) should not exceed 150°C.
The ATN3590-08 requires a bias voltage of 3.3V to 5V, and the recommended bias current is 10mA to 20mA. Ensure that the bias voltage is well-regulated and decoupled to minimize noise and ripple. Refer to the datasheet for more information on biasing and decoupling.
The ATN3590-08 is a sensitive device and requires proper ESD protection. Skyworks recommends using a diode array or a transient voltage suppressor (TVS) to protect the device from electrostatic discharge. Refer to the Skyworks application note AN2011 for more information on ESD protection.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ATN3590-08 Overview
Use the download button to access the ATN3590-08 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ATN35,
or try a keyword search, such as RF/Microwave Attenuators
