Panasonic recommends a 4-layer PCB with a solid ground plane and a separate power plane for the ATQ204. The device should be placed near the center of the board, and the input and output pins should be routed away from each other to minimize noise coupling.
The ATQ204 requires a bias voltage of 5V ± 10% on the VCC pin, and a bias current of 10mA ± 10% on the IBIAS pin. The bias voltage and current should be stable and noise-free to ensure optimal performance.
The ATQ204 is rated for operation from -40°C to +125°C, but the device's performance may degrade at temperatures above 85°C. It's recommended to operate the device within the -20°C to +70°C range for optimal performance.
The ATQ204's output signal is a differential signal that requires a differential amplifier or a instrumentation amplifier to condition the signal. The output signal should be filtered and amplified to ensure accurate measurements, and the signal chain should be designed to minimize noise and distortion.
Panasonic recommends a two-point calibration procedure for the ATQ204, where the device is calibrated at 0°C and 50°C. The calibration procedure involves applying a known input signal to the device and adjusting the output signal to match the expected value.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATQ204 Overview
Use the download button to access the ATQ204 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATQ20,
or try a keyword search, such as Power/Signal Relays