Panasonic recommends a 4-layer PCB with a solid ground plane and a separate power plane for the ATQ209SA. The device should be placed near the center of the board, and the input and output pins should be routed away from each other to minimize noise coupling.
Panasonic recommends using a reflow soldering process with a peak temperature of 260°C and a dwell time of 30-60 seconds. The device should be placed on a flat, clean PCB surface, and the solder paste should be applied evenly to ensure proper wetting.
The ATQ209SA is rated for operation from -40°C to 125°C, but Panasonic recommends derating the device for extended operation above 100°C to ensure reliability.
Panasonic recommends using ESD protection devices such as TVS diodes or ESD arrays on the input and output lines of the ATQ209SA. The device should also be handled in an ESD-controlled environment, and personnel should wear ESD-protective clothing and wrist straps.
The ATQ209SA is rated for operation from 1.8V to 5.5V, but Panasonic recommends using a regulated power supply with a voltage range of 3.3V ±10% for optimal performance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATQ209SA Overview
Use the download button to access the ATQ209SA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATQ20,
or try a keyword search, such as Power/Signal Relays