ATS060SM-1E footprint, schematic symbol and 3D model by CTS

Symbol

PCB Footprints

3D Models

ATS060SM-1E Details

A good PCB layout for the ATS060SM-1E involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure proper biasing, connect the VCC pin to a stable voltage source, and the GND pin to a solid ground plane. The recommended bias voltage is between 4.5V and 5.5V. Additionally, ensure that the input signals are within the recommended voltage range of 0V to VCC.
The ATS060SM-1E is rated for operation from -40°C to +125°C. However, it's recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance and reliability.
The ATS060SM-1E has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures when handling the device. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-safe environment.
The recommended soldering profile for the ATS060SM-1E involves a peak temperature of 240°C, with a dwell time of 30-60 seconds. Ensure that the device is not exposed to temperatures above 260°C, and that the soldering process is completed within 3 minutes.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ATS060SM-1E schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ATS06, or try a keyword search, such as Quartz Crystals

If you searched for ATS060SM-1E, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →