Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ATS120B-E - CTS

Description: CTS ATS and ATS-SM series incorporates a high Q quartz resonator in a proven resistance-weld metal package. They are ideal for supporting a wide range of commercial and industrial applications.

Download ATS120B-E Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ATS120B-E - CTS - PCB symbol
click to zoom
PCB Footprints
ATS120B-E - CTS PCB footprint - Other - Other - ATS120B-E-1
click to zoom
3D Models
ATS120B-E - CTS - 3D model - Other - ATS120B-E-1
click to zoom

ATS120B-E Details

  • Manufacturer Part Number:

    ATS120B-E

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • HTS Code:

    8541.60.00.50

  • Factory Lead Time:

    8 Weeks

  • Manufacturer:

    CTS Corporation

  • YTEOL:

    6.03

  • Additional Feature:

    AT CUT

  • Aging:

    5 PPM/YEAR

  • Crystal/Resonator Type:

    PARALLEL - FUNDAMENTAL

  • Drive Level:

    100 µW

  • Frequency Stability:

    0.005%

  • Frequency Tolerance:

    30 ppm

  • Load Capacitance:

    18 pF

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Operating Frequency-Nom:

    12 MHz

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Physical Dimension:

    10.85mm X 4.50mm X 3.68mm

  • Series Resistance:

    40 Ω

  • Surface Mount:

    NO

ATS120B-E Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from noise sources. Use a common mode choke or ferrite bead to filter the power supply lines.
  • Follow the calibration procedure outlined in the datasheet. Use a high-precision voltage source and a calibrated oscilloscope to measure the output voltage. Adjust the calibration resistors according to the datasheet instructions.
  • The ATS120B-E is rated for operation from -40°C to +125°C. However, the device may not meet its specified performance over the entire temperature range. Consult the datasheet for specific temperature-related specifications.
  • Yes, the ATS120B-E is designed to withstand vibrations up to 10g. However, it's essential to ensure the device is properly mounted and secured to the PCB to prevent damage or malfunction.
  • Consult the troubleshooting guide in the datasheet. Check the power supply voltage, signal connections, and PCB layout. Use an oscilloscope to measure the output voltage and verify it meets the specified requirements.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ATS120B-E Overview

Use the download button to access the ATS120B-E schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS12, or try a keyword search, such as Quartz Crystals

Parts related to ATS120B-E

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑