ATS16B footprint, schematic symbol and 3D model by CTS

Symbol

PCB Footprints

3D Models

ATS16B Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from noise sources. Use a common mode choke or ferrite bead to filter the power supply lines.
Use a thermocouple with a high accuracy rating (e.g., Type K or T) and ensure good thermal contact between the thermocouple and the ATS16B. Calibrate the system using a known temperature reference point.
The maximum cable length depends on the specific application and noise environment. As a general rule, keep the cable length under 10 feet (3 meters) to minimize signal degradation and noise pickup.
Yes, the ATS16B is designed to withstand moderate vibration levels. However, extreme vibration may affect the sensor's accuracy. Consider using vibration isolation mounts or a shock-absorbing material to minimize the impact of vibration.
Check the power supply voltage, ensure proper grounding, and verify the output signal using an oscilloscope or multimeter. Consult the datasheet and application notes for troubleshooting guidelines.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ATS16B schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ATS16, or try a keyword search, such as Quartz Crystals

If you searched for ATS16B, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	ATS16B-E CTS Corporation Parallel - Fundamental Quartz Crystal, 16MHz Nom
For a full list of alternate parts for ATS16B, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →