A good PCB layout for the ATS605LSGTN-S-T involves keeping the sense lines (VOUT and GND) as short as possible, using a ground plane, and minimizing the distance between the device and the sense resistor. Allegro provides a recommended PCB layout in their application notes.
The sense resistor value depends on the desired output voltage range and the current sensing range. Allegro provides a sense resistor calculator tool on their website to help with the selection. Typically, a sense resistor value between 0.01 ohms to 0.1 ohms is suitable for most applications.
The maximum allowable voltage on the VCC pin is 5.5V. Exceeding this voltage may damage the device. It's recommended to use a voltage regulator or a voltage limiter to ensure the VCC pin voltage remains within the specified range.
To minimize EMI, use a shielded cable for the sense lines, keep the sense lines away from noise sources, and use a common-mode choke or a ferrite bead on the sense lines. Additionally, ensure the PCB layout is designed to minimize radiation and susceptibility to EMI.
The thermal resistance of the ATS605LSGTN-S-T package is typically around 45°C/W (junction-to-ambient) and 10°C/W (junction-to-case). This information is usually available in the device's thermal characteristics section of the datasheet.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATS605LSGTN-S-T Overview
Use the download button to access the ATS605LSGTN-S-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS60,
or try a keyword search, such as Other Sensors/Transducers
