A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the sense lines as short as possible and away from noise sources. Use a common mode filter or a ferrite bead to reduce EMI.
Calibration involves applying a known current to the device and adjusting the offset and gain registers to achieve accurate measurement. Refer to the application note AN296065 for detailed calibration procedures.
The maximum allowable voltage on the VCC pin is 5.5V. Exceeding this voltage may damage the device.
The ATS617LSGTN-T is rated for operation up to 150°C. However, the device's accuracy and reliability may degrade at high temperatures. Consult the datasheet for temperature-related specifications and derating factors.
Use a shielded cable for the sense lines, keep the device away from noise sources, and use a common mode filter or a ferrite bead to reduce EMI. Ensure the PCB layout is designed for optimal EMC performance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATS617LSGTN-T Overview
Use the download button to access the ATS617LSGTN-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS61,
or try a keyword search, such as Other Sensors/Transducers
